Chainlube PTFE
Motorex chain lube with PTFE is a fully synthetic chain lubricant with highly dust and dirt repellent properties. The special formulation with PTFE and wax, reduces friction while still ensuring optimum lubrication of all the chain links. The innovative composition of high-quality additives enable excellent chain protection as well as precise and smooth gear changing. It is intended for use on racing bikes that make short trips in dry conditions only. However, mountain bikes can also benefit from the performance of chain lube with PTFE if the climate in mileage conditions are similar.
Application of Motorex PTFE Chainlube
Start by shaking motor exchange lube with PTFE well. Then apply to the dry chain both inside and out. Leave it to take affect for a short while, then remove access chain oil with a cloth. The dirty chain can easily be cleaned with Motorex Bike Chain Degreaser
Dosage
As the saying goes, as little as possible, as much as necessary. Apply a thin layer of chain lube with PTFE to the entire length of the chain both inside and out and leave it to take affect for a few minutes. Then remove the excess oil with a cloth. The drive should not be used for several hours so that the lubricant can take affect and dry out as best as possible. Ideally, leave the chain oil to affect overnight. If the chain still has a bit of an oily sheen after being left to take affect for a long time, wipe the chain down again with the cloth.
Size:
100ml Dropper Bottle
